After cleaning the interlining, you can iron it according to the following steps:
1. Preparation: Make sure the interlining is completely dry. Prepare a clean ironing board and an iron. Heat the iron to the appropriate temperature and choose the appropriate temperature according to the material of the interlining.
2. Pre-iron treatment: If there are obvious wrinkles or depressions on the interlining, you can first gently stretch or pat it with your fingers to make it as flat as possible.
3. Ironing tips: Lay the interlining flat on the ironing board, and be careful not to create new wrinkles on the interlining. Use the tip or edge of the iron, starting from one end of the interlining, and gently iron along the texture. You can increase the pressure appropriately, but do not use excessive force to avoid damaging the interlining.
4. Special attention: For some harder or thicker interlinings, you can increase the ironing time and pressure appropriately. But for some thinner or easily damaged interlinings, you need to be more careful to avoid over-ironing.
5. Final treatment: After ironing, you can leave the interlining for a while to let it recover its shape naturally. If there are still a few wrinkles or dents, you can do a slight ironing again.
In short, ironing the interlining requires patience and care. With the correct ironing technique and proper temperature control, the flatness of the interlining can be effectively restored and its good appearance and performance can be maintained.